DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument. It is particularly suitable for experimental development and low voltage applications. Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.

The supply provides a maximum of 30 volts. Both voltage and current are precisely regulated. The power supply can be operated in either constant voltage or current volt and is protected against overload or short circuit by means of automatic cross over characteristics from constant voltage to constant current mode.

The output voltage and current can be read on digital panel meter.

The power supply's output is floating i.e., either the positive or negative output is connected to the chasis or ground. Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively, can be floated to maximum ± 30 volts DC. Standard models are for 30 Volt DC, 2 Amp/ 5 Amp/ 10 Amp DC.

RANGE	0 - 30 VDC (OR DEPEND UPON THE MODEL), continuously variable by means of fine controls.
OUTPUT CURRENT	Depends on the Model.
INTERNAL RESISTANCE	< 10 milli ohms
LOAD REGULATION	< ± (0.5% + 10mV)
LINE REGULATION	< ± (0.5% + 10mV)
RIPPLE & NOISE	< 100 mV rms
DISPLAY	3½ Digit, 0.5'' High Brightness LED for Voltage & Current.
ACCURACY	± 0.5% + 2 digits.
POWER REQUIREMENTS	230 V AC ± 10%.

Fixed supply is available without display and controls.

Customized models are also available for other voltage or current range.